• FluidPRO equipment from MAHLE Service Solutions offers a range of choices in fluid exchange equipment.
• The ATX+Boost offers technicians fully-automatic operation with precise fluid measurement to maximize efficiency.
• The added feature of the high output boost pump yields faster service times of 2 to 5 minutes.
• Features of the ATX+Boost:
• ‘Dipstick’ or ‘Cooler’ mode selector, start engine indicator (on ATX-3 only)
• Electronic diode illuminated keypad – fluid flow direction indicator verifies correct hook-up
• Transmission diagnostic pressure gauge
• New and used fluid sight glasses
• Automatic fluid level adjustment +/- ½ quarts
• Digital weight scale technology for accurate fluid exchange
• Patented bypass circuit for vehicle protection
• Adapters: Cooler line connection. Valved couplers for minimum spill. Standard adapters for Ford, GM, Chrysler, & Universal (most Asian).
• Controls: Microprocessor with digital keypad & light emitting diodes
• Dimensions (H x W x D): 45 in x 28 in x 26.5 in (112 cm x 70 cm x 67 cm)
• Fluid Tanks / Types: 26 quarts (24.6 liters) each for both new & used fluids / Multiple fluid capability
• Hoses: 10 ft. (3 m) black & red (exchange); 8 ft. (2.5 m) black (empty used tank) ATX-3+Boost also includes 5 ft. (1.5 m) clear, attached to 8 ft. (2.5 m) black hose for dipstick mode.
• New Fluid Pump: Positive displacement gear pump, 4 quarts (3.8 liters) per minute/includes diaphragm pump, 7.2 quarts (6.84 liters) per min. Diaphragm pump increases fluid suction rate in low-flow/temperature controlled transmission in ATX-3+Boost units.
• Operating Range Cooler Mode: 32° to 122°F (0° to 50°C) Dipstick Mode: 42° to 122°F (5.5° to 50°C)
• Power Source: 12 VDC - 10 Amp
• Process Time: 3 to 6 minutes average full exchange. Dipstick Mode is available on the ATX-3+Boost with 8 to 14 minutes* average full exchange.
• Scale Accuracy: ±0.03% over usable range
• Warranty: 1 Year–parts & labor
• Weight: ATX-3+Boost: 244 lbs. (111 kg)
• ATX 3+Boost Automatic Transmission Fluid Exchanger
• Includes dipstick service mode
|